If you
are working with a clean
water supply there should rarely be a problem with the nozzle
clogging.
However, if you are drawing from a tank there may be debris in
the tank, which will eventually make it's way to the nozzle and could clog
it.
Have a good filter
on the inlet then it's not the problem. Many wonder why their nozzles clog
when seemingly all bases have been covered. Well, most debris gets to
the nozzle from not
keeping quick connectors clean. Laying a hose on the ground invites
contamination. Keep the connectors clean and you should have no
problems.
If it is a problem install a high
pressure filter on the pressure side to catch any stray debris.
SOME OF THESE OPERATIONS CAN BE
EXTREMELY DANGEROUS. IF YOU DO NOT HAVE SUFFICIENT TRAINING IN THESE PROCEDURES, WE RECOMMEND YOU
SEEK ASSISTANCE FROM A
QUALIFIED
TECHNICIAN
|